A functioning garage door is essential for many people, as we keep our worldly possessions there. Unfortunately, if you don’t take care of your garage door, it can easily hit a bump in the road and need repair or replacement. Replacing a garage door can be expensive, but there are steps you can take to repair your garage door, some of which can be done yourself. Throughout this article, we will outline what you can do to repair your garage door.
To DIY or not to DIY?
When your garage door breaks, you will be able to fix it yourself in many instances. However, in some cases, the door will be too far gone and will need to be fixed by an expert. Doing the job yourself will be cheaper because you don’t have to pay for the parts. However, some of the tasks are complex and will call for a little know-how.
When it comes to getting in the expert, you should make sure you look for reviews and find one with a proven track record. If you call in the experts, you will know that your door has been fixed to a high standard and will often be guaranteed. However, if you want to save some money, you may as well try and fix it yourself. After all, if it’s broken already, you can only make it so much worse.
Garage Door Openers
Garage door openers are susceptible to breakages for many reasons. When your openers stop working, you need to analyze the problem and work out whether it’s the door or the openers. To test this, you need to pull the release cord and try to lift the door. If you come across friction, it’s likely the garage door itself.
Next, you should try to operate the door with the switch or remote. If it doesn’t open, the first thing you should do is check the electrics or change the battery in the remote. If you call out a mechanic for that fix, you’re looking at some expensive batteries.
Sometimes, your garage door will appear to work but won’t open completely. If this is the case, you need to check the rollers for damage. If you can’t see any visible damage, make sure you lubricate them completely to see if the problem resolves.
Your garage door springs will wear over time no matter how much you look after them. You will be able to tell that the springs are going in advance, which gives you time to plan for the repair. If you’re a DIY-savvy person, you can try this repair yourself. However, the steps are complex and will require accuracy and numerous safety precautions. If you’re unsure, you should leave this one up for the professionals.
Squeaking garage doors aren’t usually much of an issue apart from the noise. However, you shouldn’t leave the issue unchecked because you can end up with further problems. To cure squeaking issues, you should grab some quality lubricant and pay close attention to hinges and rollers. If the problem continues, you should lubricate the springs completely as well as any other hinges.
The door panel may need repairing in the event of collisions or stray balls flying into your door. In some instances, you won’t be able to repair the damage. However, for smaller knocks and bumps, you should get yourself a rubber mallet.
You will need to place a two-by-four onto the dent to protect your door. Then, with your mallet, you need to tap it to iron out the dent. Alternatively, if you’ve got a small dent, you can fill it with body filler mixed with hardener. First, you need to sand the area completely. Then, once you’ve filled the dent and left it to dry, you will need to sand down the area. Lastly, it’s a case of cleaning the door and painting the area to match.
Over time, your garage door’s seal will wear down and need replacing. You will know when the seal has gone if you can see sunlight shining through the bottom of the door. Fortunately, this is a simple job that you can follow with little experience. On the majority of doors, you will find a channel at the bottom. You will need to remove the rubber gasket and slide a replacement onto the tracks.
When your garage door breaks, it can feel like the end of the world, as your worldly possessions lay exposed to the world. Fortunately, many fixes are fairly straightforward and can be done yourself, saving you a hefty bill. Remember, if the springs are broken, you should get these replaced by a professional because the job is dangerous. Also, make sure you take safety precautions no matter what job you’re doing.