Best Lubricant for Garage Doors?

Almost all things in our homes need regular maintenance. Our garage doors are no exception to this. Not only can maintaining your garage door extend the life of the door by several years but it also ensures that it’s safe to use. The good news is that it doesn’t take much to maintain a garage door. Sometimes all you need to do is apply a little bit of lubricant to the hardware of the door in order to keep it working correctly. But how do you lubricate your garage door and what type of lubricants should you use? Keep reading below to find out:

Why Lubricate a Garage Door?

If your garage door is making a noise when it opens, there’s a good chance that it needs lubricating. Here are some of the benefits of lubricating a garage door:

  • It can silence the door – over time, a garage door can start to rattle, whine and squeak. This isn’t only annoying, but it can also indicate that there’s an issue with the door. Lubricating the door can help to keep it silent and smooth.
  • Increase the life of the garage door – it can help to extend the life of the springs, hinges, rollers, track, and locks.
  • Keep it functioning properly – lubricating the door can help it to function properly. Not only that but it can help to keep it secure too.
  • Improves the movement of the door – while the loud noises of the garage door mean it needs lubricating, they also mean that your garage door is working harder to open and close. This will not only damage the motor, but it can also damage other parts of your door.

Garage doors that aren’t lubricated and maintained regularly can become noisy and eventually stop working altogether. Lubricating your garage door frees up the door’s range of motion, and it makes it a lot easier for the opener to open and close the door. This is why it’s so important to lubricate your garage door regularly.

4 Important Tasks to Perform Before Lubricating Your Garage Door

Before you apply any lubrication to a garage door, there are a few things you need to do. Here’s a list of some important tasks you need to perform before lubricating your garage door:

  1. Tighten all the nuts and bolts – if you notice any worn parts while tightening the nuts and bolts on your garage door, you will need to replace them.
  2. Inspect the rollers – make sure that they are free from dirt.
  3. Check the hinges – If you notice the hinges are noisy, you may need to replace them.
  4. Make sure your garage door opener chain is tight – a loose chain can cause the door to jerk around. It can also make a slapping sound.

Once all of these tasks are complete, you can lubricate your garage door.

The Best Lubricants to Use on Your Garage Door

You may be wondering how to lubricate your garage door, but it all begins with choosing the right lubricant for your door. Two of the best lubricants for garage doors include:

  • Silicone sprays – most silicone sprays come with a thin, long straw attachment to keep the spray contained. Silicone sprays are long-lasting and work in a range of different temperatures. Some of the other advantages of using this type of lubricant include the fact that it can reduce rust and corrosion, it dries into a non-oily film, and it reduces friction and door squeaks.
  • White lithium grease – this type of lubricant is applied by hand, so it’s a bit messier than silicone sprays. However, this means that it’s much easier to spread around. Some of the other benefits of this type of lubricant are that it dries quickly, creates a waterproof barrier, and adheres well to metal.

How to Lubricate a Garage Door

If you’ve never lubricated your garage door before, you’ve come to the right place. Follow these step-by-step instructions to do it correctly:

  1. Make sure your garage door is closed
  2. Turn off the power to the opener
  3. Use a damp rag to wipe the inside and outside of the tracks. This will remove any dirt and debris from the tracks.
  4. Open the door and lubricate the hinges
  5. Lubricate the rollers (this includes the tiny ball bearings inside the rollers). Once you’ve done this, you will need to remove any excess lubricant to prevent the door from becoming unbalanced.
  6. Lubricate the bearing plates and springs (these are located at the top of the garage door). You will need to open and close the door in order to distribute the grease evenly.
  7. Lubricate the lock and armbar – this will make it easier to manually lock the garage door.
  8. Lubricate the top of the rail. Use a rag to spread the grease around.

It only takes a matter of minutes to lubricate your garage door system, but by doing so every 6 months, you’ll not only save yourself money on repair costs, you’ll also reduce the wear and tear on your garage door. You’ll be surprised just how far a little maintenance goes.